JNOS – Forwarding Mail Internally with BPQ over Telnet

Internally Forwarding Mail to BPQ

Create a new user with BBS flags for your JNOS instance within the BPQ User Management Area.

For this account, do not use the callsign of the JNOS instance, instead use a descriptive alias. This avoids a problem with callsign collision which will usually cause JNOS to refuse to work. In my example, I will refer to this USER as RRRNOS on the BPQ side.

The HROUTE of RRRNOS is RRRNOS.PE1RRR.NLD.EURO, as configured in the mailbox settings for JNOS.

All mail for RRRNOS arrives first at PE1RRR.NLD.EURO and is queued for forwarding to RRRNOS.

In turn, we also will refer to the BPQMail instance in the JNOS configuration as MATRIX, rather than the callsign.

Configuring forward.bbs

IMPORTANT: The passwords for BPQ telnet sessions are NOT defined in the BPQMail User account, but instead in the bpq32.cfg node configuration file under the TELNET port declaration. See BPQ Telnet Server Documentation.

matrix 0023 P
telnet <bpq node address> <bpq fbbport> cronly
.<bpq port defined telnet userid>
* 0
* 0
<list of areas to forward>

IMPORTANT: The FBBPORT is often misunderstood as a direct connection to the BBS- when it is not. The port opens a connection to only the node which is why we must issue an extra command: .BBS

FBB sysops frequently get this wrong and wonder why their telnet forwarding to a BPQMail instance doesn't work.

JNOS ftpusers Configuration

It is necessary to provide BPQMail with an account on JNOS with which to log in and access BBS functions. This is possible by adding an account with the necessary privileges set.

JNOS won’t allow the use of an invalid callsign for a login user ID by default, to do so would require recompiling the JNOS source with one of the config.h “defines” changed (it is easy to do, but not recommended).

A workaround, if forwarding downstream to yourself– is to just use your own callsign for the login, as it would be coming from your own upstream BPQMail BBS anyway.

Permissions needed (if not using your own sysop login): Expert, BBS.

From the FTPUSERS PERMISSIONS reference sheet, sum up the permission level as such:

  • BBS: 8192
  • Expert: 16384
  • Summed together: 24576
The following is a list of the user permission values allowed in FTPUSERS file.
  Name          value    hex value    comments
FTP_READ         1        0x1       /* Read files */
FTP_CREATE       2        0x2       /* Create new files */
FTP_WRITE        4        0x4       /* Overwrite or delete existing files */
AX25_CMD         8        0x8       /* AX.25 gateway operation allowed */
TELNET_CMD       16       0x10      /* Telnet gateway operation allowed */
NETROM_CMD       32       0x20      /* NET/ROM gateway operation allowed */
SYSOP_CMD        64       0x40      /* Remote sysop access allowed */
EXCLUDED_CMD     128      0x80      /* This user is banned from the BBS */
PPP_ACCESS_PRIV  256      0x100     /* bit for PPP connection */
PPP_PWD_LOOKUP   512      0x200     /* Priv bit for peerID/pass lookup */
NO_SENDCMD       1024     0x400     /* Disallow send command */
NO_READCMD       2048     0x800     /* Disallow read command */
NO_3PARTY        4096     0x1000    /* Disallow third-party mail */
IS_BBS           8192     0x2000    /* This user is a bbs */
IS_EXPERT        16384    0x4000    /* This user is an expert */
NO_CONVERS       32768    0x8000    /* Disallow convers command */
NO_ESCAPE        65536    0x10000   /* Default is no escape char */
NO_LISTS         131072   0x20000   /* No lists displayed from mailbox */
NO_LINKEDTO      262144   0x40000   /* Disable '*** linked to'  */
NO_LASTREAD      524288   0X80000   /* Ignore lastread in <area>.usr
                                       (shared accts)*/
NO-FBBCMP        1048576  0x100000  /* Avoid FBB compression */
XG_ALLOWED       2097152  0X200000  /* Allow XG (dynip route) cmd */

Edit the ftpusers file and append:

<callsign> <password> /jnos/public 24576

Note: If this BBS is also a regular user, give them AX and netrom permissions too (add 8 + 32 to the final sum).

Configuring BPQ Forwarding

The BPQ User created with the BBS flag (RRRNOS in this example) should be visible in the Forwarding Management Area of BPQ as one of the callsigns in the list.

Click on RRRNOS user and then set the fields with the following information, if not explicitly mentioned, the fields are to be left empty.

Connect Script

C <jnos host/ip> <jnos port> TELNET <jnos userid> <jnos password>



Hierarchical Routes (Flood Bulls)


HR (Personals and Directed Bulls)


Enabled Checkbox/Flags (all not explicitly mentioned should be disabled)

  • Enable Forwarding [ON] Interval [600]
  • FBB Blocked [ON] Max Block [10000]
  • Send new messages without waiting for poll timer [ON]
  • Allow Binary [ON]
  • Use B2 Protocol [ON]

Click Update to finish.

Check and Test

Open a new terminal an go to your BPQ directory, open the log file using the tail command, this will open the log file and checks the file for new data is written to it every 0.1 seconds.

tail -f -s 0.1 logLatest_BBS.txt

From the BPQ Forwarding Area, select the BBS account and click Forward

Alternatively use: fwd <callsign> now from the BPQ mail prompt.

Watch the log file for errors.

If all goes well this is what you should see:

200213 16:31:41 |RRRNOS    Incoming Connect from RRRNOS
200213 16:31:41 >RRRNOS    [BPQ-$]
200213 16:31:41 >RRRNOS    0 messages to fwd to RRRNOS
200213 16:31:41 >RRRNOS    PE1RRR BBS>
200213 16:31:41 <RRRNOS    [JNOS-2.0m-B2FHIM$]
200213 16:31:42 <RRRNOS    FF
200213 16:31:42 >RRRNOS    FQ
200213 16:31:42 |RRRNOS    RRRNOS Disconnected

To test from the other direction, log into JNOS sysop console and issue:

Note: In the examples below. ‘MATRIX’ is the arbitrary name I have given to the BPQ mailbox in JNOS, it just so happens to also be the BPQ mailbox’s NETROM alias but that is not important at all as this is a telnet session, it is just for practicality.

mbox kick <bpq bbs name defined in forward.bbs>
mbox kick MATRIX

Note: when calling mbox kick, use upper case for the callsign if there is no local mail to actually forward. This initiates a reverse forward. If you don’t use this method, and you have no mail to forward, it won’t try and connect, and as such you won’t see diddly squat happening in the log file.